HIGH PERFORMANCE CARBIDE BANDSAW BLADE, ESPECIALLY FOR MODERN HIGH-OUTPUT MACHINES
CHARACTERISTICS
APPLICATIONS
ADVANTAGES
WIDTH X THICKNESS |
TPI (TEETH PER INCH) |
||||||||||
mm | inch | 3,0/4 | 3,0/4 | 2,0/3 | 2,0/3 | 1,4/2 | 1,4/2 | 1,3/1 | 1,3/1 | 0,7/1 | 0,7/1 |
27 x 0,9 | 1-1/16 x 0,035 | TH2 | TH3 | ||||||||
34 x 1,1 | 1-3/8 x 0,042 | TH2 | TH3 | TH2 | TH3 | ||||||
41 x 1,3 | 1-5/8 x 0,050 | TH2 | TH3 | TH2 | TH3 | TH2 | TH3 | ||||
54 x 1,3 | 2-1/8 x 0,050 | TH2 | TH3 | TH2 | TH3 | ||||||
54 x 1,6 | 2-1/8 x 0,063 | TH2 | TH3 | TH2 | TH3 | ||||||
67 x 1,6 | 2-5/8 x 0,063 | TH2 | TH3 | TH2 | TH3 | ||||||
80 x 1,6 | 3-1/8 x 0,063 | TH2 | TH3 | TH2 | TH3 | ||||||
CONTACT LENGTH mm |
60-150 | 90-180 | 90-210 | 130-250 | 130-300 | 200-430 | 200-650 | 300-800 | 300-1500 | 450-1800 |
CT-APEX® P-TH |
CT-APEX® S-TH |
CT-APEX® N-TH |
|
Construction steel, Automatic steel | ![]() |
![]() |
![]() |
Carbon steel | ![]() |
![]() |
![]() |
Hardened and tempered steel | ![]() |
![]() |
![]() |
Hardened and tempered steel over 1200 N/mm2 | ![]() |
![]() |
![]() |
Case-hardened steel, Spring steel | ![]() |
![]() |
![]() |
Bearing steel | ![]() |
![]() |
![]() |
Hot tool steel | ![]() |
![]() |
![]() |
Cold tool steel | ![]() |
![]() |
![]() |
High-speed steel | ![]() |
![]() |
![]() |
Ferritic stainless steel | ![]() |
![]() |
![]() |
Austenitic stainless steel | ![]() |
![]() |
![]() |
Martenistic stainless steel | ![]() |
![]() |
![]() |
Duplex and heat-resistant steel | ![]() |
![]() |
![]() |
Cast iron | ![]() |
![]() |
![]() |
Nickel alloys | ![]() |
![]() |
![]() |
Titanium alloys | ![]() |
![]() |
![]() |
Aluminum alloys | ![]() |
![]() |
![]() |
Copper alloys | ![]() |
![]() |
![]() |
Aluminum bronze | ![]() |
![]() |
![]() |
advised
suited
allowed
not expected