IMG-20180212-WA0001 (1)
20231106_120047 (1)
IMG_20180427_112925 (2)
icona_sektor_titan_flex_tc_masterclean_1_1.3
previous arrow
next arrow

TITANFLEX® TC MASTERCLEAN

PRODUCT LEVEL 2
GEOMETRY TC (TRIPLE CHIP)
BELT WIDTH
65x0,9- 100x0,9 mm
BREAK-IN

TITANFLEX® TC MASTERCLEAN

NEW TCT BANDSAW BLADE FOR WOOD MADE OF SPRING STEEL ALLOY WITH VERY HIGH FATIGUE RESISTANCE; TENSIONED AND RE-TENSIONABLE STEEL FOR LONGER BLADE LIFE

CHARACTERISTICS

  • Blade with resistance welded TCT (Tungsten Carbide Tips) teeth, without brazing
  • TC (Triple Chip) tooth geometry for maximum efficiency in thin cutting of hard and exotic wood
  • Thin cutting thickness reduced to a minimum for minimal material loss
  • BREAK-IN blade treatment for rounding of edges and maximum extension of blade life
  • Positive rake cutting taper for low feed resistance and minimal friction on the flanks
  • Fixed and variable tooth spacing available to reduce noise and harmonic vibration
  • Extra set of teeth on the blade back to completely eliminate wood dust from the surface

ADVANTAGES

  • Increased cutting life; up to 10 times compared to conventional bandsaw blades
  • Very high resistance to abrasive wear
  • Increased productivity and extremely precise with high feed rates
  • Impeccable cutting quality with extra-smooth surface finish
  • Excellent chip removal thanks to the special double-edged tooth design
  • Possibility for resharpening
WIDTH X THICKNESS
                                           TEETH PER INCH
mm inch TPI 1,3 1/1,3 KERF  KERF 
    mm 19 26/19  mm  mm
65 x 0,9 2-9/16×0,035 O O 1,37 1,27
80 x 0,9 3-1/8×0,035 O O 1,37 1,27
100 x 0,9 4×0,035 O O 1,37

PRIMARY APPLICATIONS

  • Production on high-volume horizontal band saw machines for hard and exotic wood
  • Production of glued hardwood panels
  • Production of hardwood floors
  • Production of hardwood boards
Request informations